Neu von Mini-Circuits
Patch Panel, 96 x 2.92 mm Female-Female, DC – 40 GHz, 50 Ohm, 5 Höheneinheiten
ZT-96KFFL-KF50+

14. Nov 2022

• Convenient panel-mounted design
• Excellent VSWR
• Flat frequency response

Applications

• Production test set-ups
• Simplification of cable runs
• Interconnection of RF cables & equipment

Neu von Mini-Circuits
19´´-Panel mit 10x 30 dB Dämpfungsgliedern, einsetzbar von DC – 18 GHz
ZT-275

14. Nov 2022

• 10 x precision fixed attenuators
• Convenient panel-mounted design
• 20W power rating
• Connectors SMA-Female

Applications

• Production test set-ups
• High power test set-ups
• RF input protection

Neu von Mini-Circuits
Digital programmierbares Dämpfungsglied bis 31,5 dB, 0,1 – 50 GHz, 50 Ohm
ZX76-50G-30-V+

14. Nov 2022

• Wideband, operates up to 50 GHz
• 0 – 31.5 dB, 0.5 dB Step
• Immune to latch up
• High IIP3, 50 dBm
• Low Insertion Loss
• Good VSWR, 1.5:1 typ.
• Glitch-less attenuation transitions
• Dual or Single supply voltage: Vdd=+3.3V

Applications

• Test Setup
• 5G
• Satellite Communications
• X band, S band, C band, KU band, and K band Radars
• EW Test Sets

Neu von Mini-Circuits
Designer-Kit von festen Dämpfungsgliedern mit N-Anschlüssen, DC – 6GHz, 50 Ohm
K1-UNAT-A+

14. Nov 2022

• Wideband, 50Ω
• 3, 6, 10, 15, 20 dB attenuation, 2 of each
• Type-N male & female connector
• Rugged Unibody construction
• Small size 2.1”
• Very low cost

Applications

• Test Setup
• Laboratory use
• Development purpose

Neu von Mini-Circuits
Extrem breitbandiger Gain-Block, 18 – 54 GHz, 50 Ohm
ZVA-543+

14. Nov 2022

• High gain, 34 dB typ. over the entire operating band
• Good gain flatness, ±2.0 dB typ.
• High saturated output power, +27 dBm typ.
• Adjustable DC voltage, +10 to +15 V
• DC protected against over-voltage, reverse-voltage conditions
• Connectore 1.85mm Female

Applications

• Wideband Test and Instrumentation
• 5G mmW
• SATCOM
• Wireless Infrastructure

Neu von Mini-Circuits
4x Handflexibles Messkabel, phasenselektiert DC – 6 GHz, 50 Ohm
Z086-12SMMCX1+

14. Nov 2022

• Kit of 4 phase matched cables, ±2° phase difference max
• Low loss, 0.67 dB typ. at 6 GHz
• Excellent return loss, 22 dB typ. up to 6 GHz
• Hand formable to almost any custom shape without special bending tools
• 6mm bend radius for tight installations
• Anti-torque nut prevents cable stress during installation
• Insulated outer jacket standard
• Connectors SMA-Male to MCX-Male

Applications

• Replacement for custom bent 0.086” semi-rigid cables
• Communication receivers and transmitters
• Radar, EW and ECM Defense Systems
• Environmental and test chambers