- Passband 4400 – 5500 MHz, 50 Ohm
- High dielectric constant and superior Q-factor
- 45dB rejection in lower stopband, 40dB in upper stopband
- Handling up to 1W input power
- Rugged, unibody housing with SMA-connectores
- Ultra wideband 800 – 3000 MHz, 50 Ohm
- High power handling up to 150W
- Low insertion loss, 0.2dB
- High directivity, 28dB
- High power, 50W
- Class-A amplifier, usable up to 75W
- 50 – 500MHz, 50 Ohm
- No damage with an open or short output load under full CW output power
- Shuts off when base plate temperature exceeds +100°C
- Internal power regulator (current remains constant over 22 to 28V)
- Over voltage protection, shut off above 29V
- Preset Wrench 8,0 +- 0,32 inch-lbs
- Wrench Size 8,0 mm
- SMA, 3,5mm, 2,92mm, 2,4mm, 1,85mm connectors
- The head will brake over when preset torque is achieved
- Effectivley prevent over/under tightening
- Blue handle, RF-Test-Lab-Quality
- Wideband DC – 18000 MHz, 50 Ohm
- Connector N-type
- Power handling up to 59 W
- Excellent return loss 29 dB up to 18 GHz
- Big anodized aluminium heat sink
- Wide operating temperature range, -55° - +100°C
- 1 MHz – 1 GHz, 50 Ohm
- Shutdown Feature (switch on and off by pulsed signals)
- Ultra High IP3, +42,9 dBm typ.
- Medium power, +28,4 dBm typ.
- Excellent noise figure, 1,4 dB typ.
